PRODUCTS
> MeshAP 5100 Outdoor - Dual 5GHz and Single 2.4GHz Full-Duplex Wi-Fi Mesh Access Point
> MeshAP 3100G Outdoor - Dual 5GHz and Single 2.4GHz Full-Duplex Wi-Fi Mesh Access Point with built-in GPS Antenna
>MeshAP 3100 Outdoor - Dual 5GHz and Single 2.4GHz Full-Duplex Wi-Fi Mesh Access Point
> MeshAP 2180 Outdoor - High Performance 2.4GHz Full-Duplex Wi-Fi Mesh Network Access Point
> MeshAP 2100 Outdoor - 2.4GHz Full-Duplex Wi-Fi Mesh Network Access Point
> MeshAP 1100 Indoor - 2.4GHz Full-Duplex Wi-Fi Mesh Network Access Point
> MeshAP Manager Web (HTML) based GUI Management Tool for MeshAP Access Points
SUPPORT
> Downloads
> Warranty
> FAQ
> Product Registration
> Update Request
Where To Buy
Technical Support
> support@arrowspan.com
Information
> info@arrowspan.com
Webmaster
> webmaster@arrowspan.com
Feedback
> feedback@arrowspan.com
Home > Support > Installation & Configuration
Wireless Network Mode
Setup Auto Mode
Under Auto Mode, MeshAP Access Points will accept both 802.11b and 802.11g clients.
Step 1. Go to the Basic section.
Step 2. Use the drop down menu to select Auto.
Step 3. Click “Save Settings and Apply” to apply the new setting.
Setup G-Only Mode
Under Auto Mode, the MeshAP Access Point will accept only 802.11g clients.
Step 1. Go to the Basic section.
Step 2. Use the drop down menu to select G-Only.
Step 3. Click “Save Settings and Apply” to apply the new setting.
> Back to Installation & Configuration
Copyright ©2006 ArrowSpan, Inc. All rights reserved. Privacy Policy