PRODUCTS
> MeshAP 5100 Outdoor - Dual 5GHz and Single 2.4GHz Full-Duplex Wi-Fi Mesh Access Point
> MeshAP 3100G Outdoor - Dual 5GHz and Single 2.4GHz Full-Duplex Wi-Fi Mesh Access Point with built-in GPS Antenna
>MeshAP 3100 Outdoor - Dual 5GHz and Single 2.4GHz Full-Duplex Wi-Fi Mesh Access Point
> MeshAP 2180 Outdoor - High Performance 2.4GHz Full-Duplex Wi-Fi Mesh Network Access Point
> MeshAP 2100 Outdoor - 2.4GHz Full-Duplex Wi-Fi Mesh Network Access Point
> MeshAP 1100 Indoor - 2.4GHz Full-Duplex Wi-Fi Mesh Network Access Point
> MeshAP Manager Web (HTML) based GUI Management Tool for MeshAP Access Points
SUPPORT
> Downloads
> Warranty
> FAQ
> Product Registration
> Update Request
Where To Buy
Technical Support
> support@arrowspan.com
Information
> info@arrowspan.com
Webmaster
> webmaster@arrowspan.com
Feedback
> feedback@arrowspan.com
Home > Products
STATION CONFIGURATION
Configuration Convention
Mesh Link Connection
There are two modes available for the MeshAP Access Point, Auto and Manual.
Auto Mode – The MeshAP Access Point automatically configures itself to the mesh network once the MeshAP is powered ON.
Manual Mode – Requires the MeshAP Access Point to manually connect with other MeshAP Access Points to associate to the mesh network.
Important: All MeshAPs MUST configure in Auto mode or Manual mode before deployment or being deployed.
> Back to Installation & Configuration
Copyright ©2006 ArrowSpan, Inc. All rights reserved. Privacy Policy