Home > Support > Installation & Configuration

Accessing the MeshAP 1100 Access Point (Login) 

Step 1. Make sure the MeshAP unit is Powered On and Ready. Once it is powered on, it  takes about 35 seconds for the MeshAP unit to get completely booted and be ready for service and configuration.

  Indoor Unit: Make sure both the WLAN light (Green) and the Power light (Yellow) are on.

      Outdoor Unit: Use wireless WLAN utility application on PC to scan for SSID: mymesh.  Make sure the SSID: mymesh MeshAP unit has the correct Mac address.

Step 2. Change PC IP address to 192.168.1.XXX Subnet mask: 255.255.255.0

Step 3a. Access MeshAP via WirelessLAN (Option A)

• Make sure PC is connected to SSID: mymesh (The default SSID for MeshAP) 

Step 3b. Access MeshAP via WAN Ethernet Port (Option B)

• Make sure the Ethernet cable is properly connected to both the MeshAP - WAN Ethernet Port and the PC - Ethernet Port. (Connect via PoE Injector)

Note: Please review the Hardware Installation Guide for more information

Step 4. Open up a Web Browser and type 192.168.1.1 to access the MeshAP Access Point.

              

Step 6. User Name: admin 
            Password: admin
Click "OK".

> Back to Installation & Configuration

Copyright ©2006 ArrowSpan, Inc. All rights reserved. Privacy Policy