PRODUCTS
> MeshAP 5100 Outdoor - Dual 5GHz and Single 2.4GHz Full-Duplex Wi-Fi Mesh Access Point
> MeshAP 3100G Outdoor - Dual 5GHz and Single 2.4GHz Full-Duplex Wi-Fi Mesh Access Point with built-in GPS Antenna
>MeshAP 3100 Outdoor - Dual 5GHz and Single 2.4GHz Full-Duplex Wi-Fi Mesh Access Point
> MeshAP 2180 Outdoor - High Performance 2.4GHz Full-Duplex Wi-Fi Mesh Network Access Point
> MeshAP 2100 Outdoor - 2.4GHz Full-Duplex Wi-Fi Mesh Network Access Point
> MeshAP 1100 Indoor - 2.4GHz Full-Duplex Wi-Fi Mesh Network Access Point
> MeshAP Manager Web (HTML) based GUI Management Tool for MeshAP Access Points
SUPPORT
> Downloads
> Warranty
> FAQ
> Product Registration
> Update Request
Where To Buy
Technical Support
> support@arrowspan.com
Information
> info@arrowspan.com
Webmaster
> webmaster@arrowspan.com
Feedback
> feedback@arrowspan.com
Home > Products
Firmware Update
Known Issues & Solutions
- Uploading a firmware image may fail if the network connection is broken during the upgrade.
To recover from this error, simply power off and power on the unit and enter the IP Address of the unit. Users can also reconnect to the unit using the Topology, only if the unit has already associated with a Mesh Manager to re-enter the MeshAP.
- Please power off other MeshAPs when doing firmware upgrade to minimize the chance of upgrading the firmware to a different unit.
> Back to Installation & Configuration
Copyright ©2006 ArrowSpan, Inc. All rights reserved. Privacy Policy