PRODUCTS
> MeshAP 5100 Outdoor - Dual 5GHz and Single 2.4GHz Full-Duplex Wi-Fi Mesh Access Point
> MeshAP 3100G Outdoor - Dual 5GHz and Single 2.4GHz Full-Duplex Wi-Fi Mesh Access Point with built-in GPS Antenna
>MeshAP 3100 Outdoor - Dual 5GHz and Single 2.4GHz Full-Duplex Wi-Fi Mesh Access Point
> MeshAP 2180 Outdoor - High Performance 2.4GHz Full-Duplex Wi-Fi Mesh Network Access Point
> MeshAP 2100 Outdoor - 2.4GHz Full-Duplex Wi-Fi Mesh Network Access Point
> MeshAP 1100 Indoor - 2.4GHz Full-Duplex Wi-Fi Mesh Network Access Point
> MeshAP Manager Web (HTML) based GUI Management Tool for MeshAP Access Points
SUPPORT
> Downloads
> Warranty
> FAQ
> Product Registration
> Update Request
Where To Buy
Technical Support
> support@arrowspan.com
Information
> info@arrowspan.com
Webmaster
> webmaster@arrowspan.com
Feedback
> feedback@arrowspan.com
Home > Support > FAQ
FAQ
Q: How do I configure the MeshAP Access Point to work with a WAN device (T1 CSU/DSU, DSL modem) connection?
A: The most important aspect of connecting your MeshAP Access Point to a WAN device is to provide a direct wire connection between the Access Point Manager and the WAN device, as T1 connections are not wireless compatible.
> Back to FAQ
Copyright ©2006 ArrowSpan, Inc. All rights reserved. Privacy Policy