Home > Support > FAQ

FAQ

Q: How do I access a MeshAP with Station mode?

A: For MeshAP in Station mode (All original MeshAPs come from ArrowSpan and are in this Default setting) you could access this MeshAP unit with the IP address: 192.168.1.1

If MeshAP (Station) has associated with an MeshAP Manager unit, you could easily access and manage the MeshAP (Station) via MeshAP Manager’s Topology page.

Step 1. Login to the MeshAP Manager unit with the correct IP Address on a browser. Make sure the PC you are using has an IP address and a subnet mask under the same network with the MeshAP Manager unit.

Step 2.  Once you login to the MeshAP Manager, Click on the “Topology” Tab.

Step 3. Expand the Topology tree if necessary by clicking on the “+” to find the MeshAP Station unit you would like to access on the mesh network.

Step 4. If you click on the MeshAP Station name, the page will automatically jump into the Station for management.

Step 5. To go back to Mesh Manager, Click on the “Topology” Tab. The interface will jump back to the Mesh Manager unit.

> Back to FAQ

Copyright ©2006 ArrowSpan, Inc. All rights reserved. Privacy Policy