PRODUCTS
> MeshAP 5100 Outdoor - Dual 5GHz and Single 2.4GHz Full-Duplex Wi-Fi Mesh Access Point
> MeshAP 3100G Outdoor - Dual 5GHz and Single 2.4GHz Full-Duplex Wi-Fi Mesh Access Point with built-in GPS Antenna
>MeshAP 3100 Outdoor - Dual 5GHz and Single 2.4GHz Full-Duplex Wi-Fi Mesh Access Point
> MeshAP 2180 Outdoor - High Performance 2.4GHz Full-Duplex Wi-Fi Mesh Network Access Point
> MeshAP 2100 Outdoor - 2.4GHz Full-Duplex Wi-Fi Mesh Network Access Point
> MeshAP 1100 Indoor - 2.4GHz Full-Duplex Wi-Fi Mesh Network Access Point
> MeshAP Manager Web (HTML) based GUI Management Tool for MeshAP Access Points
SUPPORT
> Downloads
> Warranty
> FAQ
> Product Registration
> Update Request
Where To Buy
Technical Support
> support@arrowspan.com
Information
> info@arrowspan.com
Webmaster
> webmaster@arrowspan.com
Feedback
> feedback@arrowspan.com
Home > Support > FAQ
FAQ
Q: My Access Point only accepts and connects to only one client at a time. What could be the reason?
A: One possible reason could be that the max-associations parameter is set to 1 under the service-set identifier (SSID) configuration. Use the max-associations SSID configuration mode in order to configure the maximum number of associations supported by the radio interface (for the specified SSID).
> Back to FAQ
Copyright ©2006 ArrowSpan, Inc. All rights reserved. Privacy Policy