PRODUCTS
> MeshAP 5100 Outdoor - Dual 5GHz and Single 2.4GHz Full-Duplex Wi-Fi Mesh Access Point
> MeshAP 3100G Outdoor - Dual 5GHz and Single 2.4GHz Full-Duplex Wi-Fi Mesh Access Point with built-in GPS Antenna
>MeshAP 3100 Outdoor - Dual 5GHz and Single 2.4GHz Full-Duplex Wi-Fi Mesh Access Point
> MeshAP 2180 Outdoor - High Performance 2.4GHz Full-Duplex Wi-Fi Mesh Network Access Point
> MeshAP 2100 Outdoor - 2.4GHz Full-Duplex Wi-Fi Mesh Network Access Point
> MeshAP 1100 Indoor - 2.4GHz Full-Duplex Wi-Fi Mesh Network Access Point
> MeshAP Manager Web (HTML) based GUI Management Tool for MeshAP Access Points
SUPPORT
> Downloads
> Warranty
> FAQ
> Product Registration
> Update Request
Where To Buy
Technical Support
> support@arrowspan.com
Information
> info@arrowspan.com
Webmaster
> webmaster@arrowspan.com
Feedback
> feedback@arrowspan.com
Home > Support > FAQ
FAQ
Q: How do I change the channel on the access point?
A: It should not be necessary to change the wireless channel unless you notice interference problems or you are setting up the MeshAP near another access point. MeshAPs associated with a MeshAP Manager unit will automatically calibrate its channel to reduce interference between MeshAPs on the mesh network. Should a change in the wireless channel be necessary follow these steps:
Step 1. Go to the Basic section.
Step 2. Use the "Wireless Channel" drop down menu to select a desired channel.
Step 3. Click "Save Settings and Apply" to apply the new setting.
> Back to FAQ
Copyright ©2006 ArrowSpan, Inc. All rights reserved. Privacy Policy